[Date Prev]   [Date Next] [Thread Prev]   [Thread Next] [Date Index]   [Thread Index]

 

     Re: [snips-users] Etherload in SNIPS v1.1

ignore my previous reply, i obviously moved my fingers before engaging my
brain....doh...its nearly friday!!!

as vikas points out the etherload should be owned as root, i found the same
thing when running it for the first time...i blanket changed all the
permissions and broke it....

apologies

Steve



At 16:30 05/12/01 +0000, Steve Foster wrote:
>if you are running it as the root user it should work, if you have setup an
>alternate user, that user will have to be put in the sys group, and the
>permissions changed on the device file, in order to keep access restricted.
>
>chmod g+rw /devices/pseudo/clone at 0:hme
>
>This should then allow the running user to use the "snoop -P" command, and
>also hopefully etherload to work..
>
>HTH
>
>Steve
>
>
>
>At 09:49 05/12/01 -0500, R. Richard Hirtler wrote:
>>I am receiving the following error whenever I attempt to run etherload:
>>
>>	etherload: This is a SNIPS version
>>   	etherload- Reading global config file /opt/snips/etc/snips.conf
>>   	(etherload).. locked pid-file, started new process (pid=2067)
>>   	etherload: /dev/hme: Permission denied
>>   	etherload: removing data, pid file.... Done
>>
>>Here is the portion of the config file which deals with the interfaces:
>>
>>	#
>>	device hme0
>>	bw      30  50  70
>>	pps     500 1000 1500
>>	
>>	#
>>	device hme1
>>	bw      30  50  70
>>	pps     500 1000 1500
>>
>>What is wrong with this setup?  Is my configuration incorrect, or does 
>>something need to be done at the OS level (Solaris 8) to allow access to 
>>the device (/dev/hme)?
>>
>>TIA,
>>
>>Rick
>>
>>
>>
>Steve Foster
>Senior Systems Administrator
>PSINet Europe
>Work: +44 (1223) 577322
>Mobile: +44 (7720) 425911
>
>
Steve Foster
Senior Systems Administrator
PSINet Europe
Work: +44 (1223) 577322
Mobile: +44 (7720) 425911

Zyrion Traverse Network Monitoring & Network Management Software